Add to Favorites | Chinese
How to lengthen bar code printer to print head life
From;    Author:Stand originally

Summary: The bar code head that print is the flimsiest and fragile parts of an apparatus in bar code printer. It resembles a car is a loss euqally article, final meeting damages, notice to maintain ceaselessly however, with respect to the life that can prolong bar code to print a head.

The bar code head that print is the flimsiest and fragile parts of an apparatus in bar code printer. It resembles a car is a loss euqally article, final meeting damages, notice to maintain ceaselessly however, with respect to the life that can prolong bar code to print a head.
Safeguard beforehand:
To produce best effect, heat up quick paper to need cleanness to print a head with hank ribbon or hank when every. Next ring want when noticing to print a head when clean bar code in case cut prints a head, use ground connection metal tape or antistatic mat in case electrostatic attaint prints a head.

Usable dip passes bar of cotton of 70 % alcohol, involve printer power supply first and open the head that print, brush partly in printer machinery with a few cotton cloth, or blow floating dust gently (be like: Roller, paper / ribbon sensor and) of the head that print. Do not use any hard metals or meeting tatty tool (like screwdriver) the contaminant that goes worrying the head that print in disorder.

Press on the head that print to be brushed after all from the beginning with the cotton club that takes alcohol, rotate next roller, with it the edge turns the edge is brushed, cotton club became dirty do not want reoccupy.

Cause the element that prints a premature attaint: Abrade - label / ribbon can wear away through printing the long-term shift of the head the covering layer of coating of pottery and porcelain, make print head needle (dot) expose and damage finally.
Avoid the method of abrade:
Cleanness prints a head and often use high grade and flowing and the heat of film of belt back a layer turns imprint ribbon grinds with decreasing.
Reduce pressure of the head that print to reach the temperature that print as far as possible.
Make sure ribbon width is wider than label print a head with preventing to expose by label abrade.
The problem of ribbon:

What ribbon back layer causes is dirty - the head that print is heated up quick paper and heat turn imprint the high setting cost such as high temperature, high pressure, high speed can need after ribbon is polluted. Contaminant accumulation creates hot deferent obstacle on needle of the head that print and the influence prints picture quality. Pollution increases to make print gradually quality drops and look lacklustre or attaint prints a needle. The cotton that contaminant makes soak is marvellous hard clean.

Cause to avoid ribbon to carry a layer on the back dirty

Need to use the heat that has contained protection back a layer to turn imprint ribbon, this ribbon needs to consult without agglutinant ribbon, have at the same time medicinal powder electrostatic with more lubricant action.
Previous12 Next

About us | Legal Notices | Sitemap | Links | Partner